Walk & driveway gates Sag-resistant framing Free estimates

Fence Gate Installation in Ottawa

Fencing Experts Ottawa builds and installs fence gates across Ottawa, Ontario – walk gates, double driveway gates and replacement gates for existing fences.

A single walk gate runs $450 to $1,200 installed, and a double driveway gate $1,800 to $5,000, depending on width and material. A gate that sags or drags on an existing fence can often be re-hung for $150 to $450.

Get a free gate estimate

Tell us about your project and we will get back to you within 24 hours.

What can we help with?

So the right crew reviews your project.

No obligation. We reply within one business day.

  • Walk gates from $450
  • Free on-site estimate
  • Posts set 4 ft deep in concrete
  • Owner in fencing since 2013
Gates take a beating

Why Gates Fail First

A gate is the only part of a fence that moves. It gets slammed, leaned on and pushed against snowbanks, and all of that weight hangs off one post. Most sagging gates have a gate post that wasn’t set deep or heavy enough, or a frame without a diagonal brace. We set gate posts deeper and heavier than line posts and brace every wood gate.

Gates We Build

Single gates for side and back yards

Standard 3 to 4 ft gates, braced so they don't sag and hung on heavier gate posts.

$450 to $1,200 installed, depending on material.

Get a free estimate

Double gates for cars and trailers

Two-leaf gates, usually 10 to 14 ft wide in total, with a drop rod to hold them closed in the wind.

$1,800 to $5,000 installed in wood, aluminum or steel.

Get a free estimate

Gates that pass inspection

Self-closing, self-latching and lockable, with the latch at least 1.35 m up as Ottawa's pool by-law requires.

$500 to $1,200 per gate.

Get a free estimate

Fix the gate you have

Most sagging gates come down to a leaning post or a missing brace.

Re-hangs and adjustments run $150 to $450.

Get a free estimate
Winter-ready

Gates That Still Open After a Snowfall

Ottawa snowbanks and frost heave are hard on gates. We leave clearance under the gate for snow, set the gate post deeper than the line posts so it doesn’t heave, and use heavy-duty hinges and latches made for outdoor cold. On driveway gates, a drop rod holds the leaves closed in the wind.

Built to Swing for Years

Braced frames

A diagonal brace on every wood gate to stop sag.

Heavier gate posts

Gate posts set deeper and bigger than line posts.

Lockable latches

Gravity latches, lockable latches and pool latches.

Our Process

Adding or Replacing a Gate

1

Check the opening

We check the posts first. A leaning post means a sagging gate.

2

Build or order the gate

Wood gates built on site, metal and vinyl gates ordered to size.

3

Hang and adjust

Gate hung, squared and set with even clearance.

4

Test the latch

Opened, closed and latched until it catches every time.

Fence Gate FAQs

Can you add a gate to my existing fence?

Yes. We cut the opening, add proper gate posts and build a gate to match the fence.

How wide should a driveway gate be?

Most double driveway gates are 10 to 14 ft wide in total. We size it to your driveway and the vehicles that use it.

Why does my gate keep sagging?

Usually the gate post is leaning or the gate has no diagonal brace. Fixing the post comes first.

Can a gate be automated later?

Ask us when you book. Automation needs heavier posts and power, so it has to be planned before the gate is built.

Need a New Gate or a Sagging Gate Fixed?

Free on-site estimate for walk gates, driveway gates and gate repairs.

Back to top